[OpenVPMS Developers] [JIRA] Created: (OVPMS-961) Add popup to edit dialogs to display available macros
Key: OVPMS-961 URL: https://openvpms.atlassian.net/browse/OVPMS-961 Project: VPMS Web Application Issue Type: New Feature Components: User Interface Affects Versions: 1.4 Reporter: Tim Anderson Assignee: Tony De Keizer
From http://www.openvpms.org/project/macro-list-popup-hot-key
Currently the only way to view available macros is via the Administration -> Lookups workspace. Macros should be able to be viewed while performing editing where macros are supported. Currently, this applies to: * EditDialog (all IMObject editing) * ParameterDialog (report parameters)
This change would: # have a dialog pop up when a specific key combination is pressed # display macros alphabetically by name # display the macros code and name nodes # display a large number of macros without requiring scrolling # provide a filter to query macros by partial name and or code
-- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://openvpms.atlassian.net/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira
_______________________________________________ OpenVPMS Developers Mailing List developers@lists.openvpms.org To unsubscribe or change your subscription visit: http://lists.openvpms.org/listinfo/developers Posts from this mailing list can be viewed online and replied to in the OpenVPMS Developer's forum- http://tinyurl.com/openvdf
[OpenVPMS Developers] [JIRA] Updated: (OVPMS-961) Add popup to e
Tim Anderson updated OVPMS-961: -------------------------------
Description: From http://www.openvpms.org/project/macro-list-popup-hot-key
Currently the only way to view available macros is via the Administration -> Lookups workspace. Macros should be able to be viewed while performing editing where macros are supported. Currently, this applies to: * EditDialog (all IMObject editing) * ParameterDialog (report parameters)
This change would have a macro dialog pop up when a specific key combination is pressed.
This dialog would: # display a table of macros The table would display the code and name nodes of the macros By default, it would be sorted on name # display a large number of macros without requiring scrolling Page navigation buttons will be automatically displayed if there are too many macros to fit # provide a filter to query macros by partial name and/or code By default all macros will be displayed # be closed by pressing an OK button, or the ESC key
was: From http://www.openvpms.org/project/macro-list-popup-hot-key
Currently the only way to view available macros is via the Administration -> Lookups workspace. Macros should be able to be viewed while performing editing where macros are supported. Currently, this applies to: * EditDialog (all IMObject editing) * ParameterDialog (report parameters)
This change would: # have a dialog pop up when a specific key combination is pressed # display macros alphabetically by name # display the macros code and name nodes # display a large number of macros without requiring scrolling # provide a filter to query macros by partial name and or code
> Add popup to edit dialogs to display available macros > ----------------------------------------------------- > > Key: OVPMS-961 > URL: https://openvpms.atlassian.net/browse/OVPMS-961 > Project: VPMS Web Application > Issue Type: New Feature > Components: User Interface > Affects Versions: 1.4 > Reporter: Tim Anderson > Assignee: Tony De Keizer > > From http://www.openvpms.org/project/macro-list-popup-hot-key > Currently the only way to view available macros is via the Administration -> Lookups workspace. > Macros should be able to be viewed while performing editing where macros are supported. > Currently, this applies to: > * EditDialog (all IMObject editing) > * ParameterDialog (report parameters) > This change would have a macro dialog pop up when a specific key combination is pressed. > This dialog would: > # display a table of macros > The table would display the code and name nodes of the macros > By default, it would be sorted on name > # display a large number of macros without requiring scrolling > Page navigation buttons will be automatically displayed if there are too many macros to fit > # provide a filter to query macros by partial name and/or code > By default all macros will be displayed > # be closed by pressing an OK button, or the ESC key-- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://openvpms.atlassian.net/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira
_______________________________________________ OpenVPMS Developers Mailing List developers@lists.openvpms.org To unsubscribe or change your subscription visit: http://lists.openvpms.org/listinfo/developers Posts from this mailing list can be viewed online and replied to in the OpenVPMS Developer's forum- http://tinyurl.com/openvdf
[OpenVPMS Developers] [JIRA] Updated: (OVPMS-961) Add popup to e
Tim Anderson updated OVPMS-961: -------------------------------
Original Estimate: 8h Remaining Estimate: 8h
> Add popup to edit dialogs to display available macros > ----------------------------------------------------- > > Key: OVPMS-961 > URL: https://openvpms.atlassian.net/browse/OVPMS-961 > Project: VPMS Web Application > Issue Type: New Feature > Components: User Interface > Affects Versions: 1.4 > Reporter: Tim Anderson > Assignee: Tony De Keizer > Original Estimate: 8h > Remaining Estimate: 8h > > From http://www.openvpms.org/project/macro-list-popup-hot-key > Currently the only way to view available macros is via the Administration -> Lookups workspace. > Macros should be able to be viewed while performing editing where macros are supported. > Currently, this applies to: > * EditDialog (all IMObject editing) > * ParameterDialog (report parameters) > This change would have a macro dialog pop up when a specific key combination is pressed. > This dialog would: > # display a table of macros > The table would display the code and name nodes of the macros > By default, it would be sorted on name > # display a large number of macros without requiring scrolling > Page navigation buttons will be automatically displayed if there are too many macros to fit > # provide a filter to query macros by partial name and/or code > By default all macros will be displayed > # be closed by pressing an OK button, or the ESC key-- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://openvpms.atlassian.net/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira
_______________________________________________ OpenVPMS Developers Mailing List developers@lists.openvpms.org To unsubscribe or change your subscription visit: http://lists.openvpms.org/listinfo/developers Posts from this mailing list can be viewed online and replied to in the OpenVPMS Developer's forum- http://tinyurl.com/openvdf
[OpenVPMS Developers] [JIRA] Updated: (OVPMS-961) Add popup to e
Tim Anderson updated OVPMS-961: -------------------------------
Fix Version/s: 1.5
> Add popup to edit dialogs to display available macros > ----------------------------------------------------- > > Key: OVPMS-961 > URL: https://openvpms.atlassian.net/browse/OVPMS-961 > Project: VPMS Web Application > Issue Type: New Feature > Components: User Interface > Affects Versions: 1.4 > Reporter: Tim Anderson > Assignee: Tim Anderson > Fix For: 1.5 > > Original Estimate: 8h > Remaining Estimate: 8h > > From http://www.openvpms.org/project/macro-list-popup-hot-key > Currently the only way to view available macros is via the Administration -> Lookups workspace. > Macros should be able to be viewed while performing editing where macros are supported. > Currently, this applies to: > * EditDialog (all IMObject editing) > * ParameterDialog (report parameters) > This change would have a macro dialog pop up when a specific key combination is pressed. > This dialog would: > # display a table of macros > The table would display the code and name nodes of the macros > By default, it would be sorted on name > # display a large number of macros without requiring scrolling > Page navigation buttons will be automatically displayed if there are too many macros to fit > # provide a filter to query macros by partial name and/or code > By default all macros will be displayed > # be closed by pressing an OK button, or the ESC key-- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://openvpms.atlassian.net/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira
_______________________________________________ OpenVPMS Developers Mailing List developers@lists.openvpms.org To unsubscribe or change your subscription visit: http://lists.openvpms.org/listinfo/developers Posts from this mailing list can be viewed online and replied to in the OpenVPMS Developer's forum- http://tinyurl.com/openvdf